There are some devices that offer battery backup service to computer and other peripherals especially during power blowouts. Such backups are known as Uninterruptible Power Supply (UPS) systems. Their purpose is to allow devices shut down properly during power outages without damage. They also correct power supply issues such as over-voltages. You normally would need to consider some factors before choosing UPS system for an office.

You need to put into consideration the power output of the UPS system as compared to your devices power consumption. Buy a backup system that can support all devices including wireless routers that demand much power. Furthermore, choose a backup system that can alert you about power shortcomings such as over-voltages, blowouts or power insufficiencies. That said, you might need to invest a little more to get the best UPS system.

You would also have to consider the run time of the UPS. This will determine for how long the backup system will give you power. When using devices that consume power faster, you might experience less run time. To understand the UPS run time, consider the power requirements off each device, bearing in mind that devices use more power during booting or overworking.

Also consider how the UPS detects when battery backup support should be activated. UPS systems can be grouped into 3 categories depending on power tolerance. A standby mode UPS system will only use battery power when power supply drops under a certain limit, say below 120 volts. In terms of cost, this type of power backup is relatively cheaper and more users basically consider buying it.

Another type of UPS is the online interactive model whose inbuilt transformer controls and detects changes in power supply. Only when the power is interrupted or too low that the backup system can go to battery. This model can however be disastrous especially during continuous power interruptions and may damage your computer.

You may also find another UPS system known as the dual conversion type that is considered the most effected power backup. The system is packed with an inverter that convert power supply to DC and later to AC after ensuring no power oversupply is noted. The process works out without notable transfer time. This efficiency eliminates the incoming line noise or surge because the inverter corrects any underlying problem. Thus over voltages, under voltages and related issues cannot damage your battery or the computer.

It is also of importance to consider how your backup system output power. This has to do with the actual sine wave power from an AC current. Some backup systems may not output the correct sine wave power but instead convert the power to square wave. This may not support power consuming devices like wireless routers and they may go off or get damaged in the process. To ensure you get the best value for money, consider trying the dual conversion UPS systems.

Lastly, find out the specifications of the power backup system in terms of number and nature of power outlet ports. You will need a backup system that can protect your battery and computer from power outages and blowouts results. Some cheaper systems have outlets that offer protection for only electrical noise and surges. Also consider whether the system has other ports that are fully protected from electrical risks. Such ports may include the Ethernet, phone jack and other cable outlets.